Product Overview

The Interceptor 2000 Industrial Strength Commercial Air Cleaner Provides the Most Aggressive Contaminant Removal for the Most Demanding Environments

Think you’ve got a tough indoor pollution problem? Meet the solution! With a whopping 25 inches of advanced filtering media, nothing beats the Interceptor-2000!

For difficult or demanding industrial environments, including auto body shops, welding shops, spray paint booths, etc, only the most vigorous filtration is acceptable. The I-2000 Air Purifier is the Industrial Workhorse of our Commercial Air Cleaning Systems. The Interceptor 2000 industrial air cleaner is capable of removing heavy dust, smoke, oil mist, odors, gases, chemicals, and many more contaminants. This unit is a money-saver because it allows you to recycle your heated or cooled air, rather than exhausting to the outside. This means it saves you money year-round! 1 Interceptor-2000 industrial air cleaner is recommended for every 1500 – 2000 sq. ft. (approximately).

How does the Interceptor-2000 Industrial Air Cleaner work?

By using a powerful blower it’s able to easily pull the air from dust-laden or smoke-filled areas. 25 inches of filter media means over 95% of chemicals, VOCs, odors, oil mist, smoke particles, etc. are removed. Discharged air is refreshing and remarkably free of contaminants. This is particularly beneficial for workers in highly contaminated areas such as spray paint booths, body shops, manufacturing, or factories. Microscopic airborne particles are also trapped. Everyone prefers breathing clean air. The Interceptor will remove pollutants that cause discomfort, stuffiness, and long-term health issues.

25 Inches of Superior Filtration in the Interceptor-2000

Stage 1 – Pleated Pre-Filter (4″) MERV-8
First, the pre-filter captures mold spores, large dust particles, hair spray, cement dust, paint spray, etc. Efficiency has an 85% rating particles as small as 3 microns. The Pre-filter will capture the larger particles and will prolong the life of subsequent filters.
Replace the pre-filter every 1-2 months.

Stage 2 – Multi-pocket Bag Filter (15″) – 60-65% Efficiency
Next, the multi-pocket filter is capable of removing heavy dust, smoke, oil mist, odors, gases, chemicals, and many more contaminants from the air. The unique design of a multi-pocket filter allows the air to pass through an increased surface area with a less restrictive airflow. Each pocket holds particles until fully inflated while maintaining adequate airflow between adjacent pockets. 
Replace the Bag Filter every 3 months.

Stage 3 – HEPA Filter (6″) – 90/95 ASHRAE
Finally, the HEPA filter in the Interceptor 2000 is a throw-away filter in a rigid metal frame. Particles (such as smoke, dust, etc.) that get past the bag filter are trapped in the HEPA filter. Proper maintenance of the HEPA filter is absolutely essential to the functionality of the Interceptor 2000 industrial air cleaner.
Replace the HEPA filter every 12 months.

OPTIONAL – Remote Control
Easily control the settings on your Interceptor-2000 Industrial Air Cleaner with a handy Remote Control Key Fob. If your I-2000 is installed in an awkward area or is too high to reach, the remote control is an excellent choice. Each receiver is factory installed and comes with 2 battery-operated remote control key fobs. (Multiple air cleaners require a separate receiver/transmitter for each unit.) Receiver / Transmitter range is approximately 100 feet under normal operating conditions.

Interceptor 2000 Industrial Strength Commercial Air Cleaner Specifications

Capacity	Up to 2,000 Sq. Ft.
2-Speed	High – 1650 CFM | Low – 1450 CFM
Sound Level @ 5′	High – 72 dB | Low – 70 dB
Installation Options	Ceiling Mount or Wall Mount
The Interceptor-2000 is equipped with (4) eyebolts installed 16″ on center on top of each unit for easy installation. Installation hardware also includes (4) “S” hooks, (4) eye lags, and 20′ of industrial hanging wire.
Dimensions	48″ (L) x 24″ (W)  x 24″ (H)
Cabinet Options	18 Gauge Steel – Available in Black or Light Gray
Weight	Shipping – 200 lbs. | Installed – 160 lbs.
Electrical	115V, 60 Hz | 10 Amps
Power Cord	10′ long | 3-prong grounded plug – Plug-in or Hardwire
Media	3-Filter System Includes; (1) 4-inch Pleated Pre-Filter – MERV-8 (1) 15-inch Multi-pocket Bag Filter – 60-65 efficiency (1) 6-inch Final Stage HEPA Filter – 90/95 ASHRAE
Motor	Torsion flex w/auto shut-off. Direct drive centrifugal blower
Warranty	1 Year’s Manufacturer’s Warranty
Certifications	All electrical components and fan motor are UL listed & CSA certified
Interceptor-2000 Owner’s Manual
Interceptor-2000 Spec Sheet – Brochure
This unit has not been tested for compliance with California Air Resource Board requirements and cannot be shipped to California.
This item ships by LTL freight. Please refer to our shipping policy by clicking here.
This unit is NOT a stock item. It’s built to order up and can take up to several weeks to ship. Please consider this when scheduling your project.

Request for Quote

Please complete the following information. We’ll get your quote to you within 24 hours.  If you’re not sure about what Smoke Eater(s) you need, we’ll be happy to provide you with a recommendation. You can fill out our Smoke Eater Recommendation form here.  You can also use our CFM Calculator to determine the optimal CFM requirements for your specific application.